A storage bed base sizes list only works if the base, the mattress and the storage lid all agree. The base must match the mattress in centimetres, and the lift mechanism must match how the bed is used in your market. ellda mobilya makes bed base sets in 160 × 200 cm, 180 × 200 cm and 90 × 200 cm, and this guide explains how to check those sizes against your market and what to ask about the storage.
We are a furniture manufacturer in Kayseri, Türkiye, producing sofa sets, corner sofas, bed base sets and mattresses since 2010. This guide is the sizing and mechanism checklist we give importers. For the basics of what a baza is, read Turkish bed base (baza) explained first. Last verified: November 2026.
What does "size" mean on a storage bed base?
A storage bed base has three measurements that buyers often mix up. Treat them as separate lines in the enquiry.
- Mattress size: the nominal width × length of the mattress the base is made to carry, in centimetres. This is the number in the catalogue (for example 180 × 200 cm).
- Outer size of the base: the upholstered box is usually a little larger than the mattress, because of fabric, padding and frame. Ask for the outer width, length and height per model.
- Headboard width: a separate dimension that decides how much wall the bed needs. In our catalogue it ranges from 90 cm to 270 cm, and the same mattress size can come with very different headboards.
The European measurement standard for beds, EN 1334, covers how dimensions of mattresses, bed frames, divans and bed bases are measured and which tolerances apply to nominal sizes (EN 1334:1996 summary). It is a measuring method, not a list of mandatory bed sizes. Mattress sizes by market are trade custom, so confirm them with your local mattress supplier.
Which storage bed base sizes does ellda make?
Our bed base sets are made for three mattress sizes. Of the 29 sets in the 2025 bedding catalogue, 4 take 160 × 200 cm, 21 take 180 × 200 cm and 4 are single bases for 90 × 200 cm.
| Mattress size | Sets in catalogue | Typical use | Example models |
|---|---|---|---|
| 90 × 200 cm | 4 | Single beds, twin pairs, guest rooms | Aspendos, Carmen, Alya, Sude |
| 160 × 200 cm | 4 | Compact double bedrooms | Platin, Asperos, Beste |
| 180 × 200 cm | 21 | Large double bedrooms | Nova, Chester, Business, Richmond |
All figures are catalogue dimensions. Confirm current dimensions for each model in the quote. If your market needs another size, ask whether it is possible for the model; we do not list sizes beyond these three.
Which storage bed base sizes fit your market?
Match the base to the mattress your customers already buy. The table gives retail size examples; it is not a regulation, and names differ by country. The European row uses the IKEA Germany and IKEA France listings, not an EU-wide size standard.
| Market or retailer example | Mattress sizes (width × length) | Fit with ellda base sizes |
|---|---|---|
| IKEA Germany and France (selected examples) | 90 × 200, 140 × 200, 160 × 200, 180 × 200 cm | 90, 160 and 180 share nominal sizes with our bases; confirm model dimensions and fit. 140 × 200 is not in our base list |
| UK | Single 90 × 190, double 135 × 190, king 150 × 200, super king 180 × 200 cm | Super king 180 × 200 matches; single is 10 cm shorter than our 90 × 200 base |
| US and Canada | Twin 38 × 75 in, full 54 × 75 in, queen 60 × 80 in, king 76 × 80 in | None match: queen is about 152 × 203 cm, king about 193 × 203 cm |
| Gulf and Middle East | Often metric, varies by retailer | Ask your retailers which sizes they stock before ordering |
The pattern to remember: the metric sizes (90, 160 and 180 × 200 cm) travel well; the inch-based US sizes do not fit a 160 or 180 cm base, and the UK single and double lengths differ by 10 cm. A mattress 5 cm too long will not sit flat in a box base, and one that is too short leaves gaps. Mattress inch conversions are our arithmetic from the inch sizes, so check them with your own supplier. For a wider comparison, see our guide on mattress sizes by country.
What storage mechanisms can a bed base have?
Storage on a bed base is delivered in a few mechanical ways. Each has different consequences for packing, use and returns.
- Gas-lift (amortisörlü) top: the base lifts on gas struts, usually with the mattress staying in place. In the 2025 catalogue photos, 15 of the 29 sets are shown with a gas-lift base.
- Side or foot-end opening: the direction the lid opens decides whether the bed can stand against a wall. Ask per model which direction applies.
- Drawers: a common divan format in some markets. Do not assume a Turkish baza has drawers; ask whether the model you want offers them.
- Storage pouf (sandıklı puf): a separate box at the foot end shown in several catalogue photos. It is a different piece from the base storage and is quoted separately.
Whichever mechanism you choose, specify it by model in the enquiry. Whether a lift-up base is available on models not shown with one is confirmed in the quote.
Checklist: what to specify for a storage bed base order
- Model name exactly as in the catalogue.
- Mattress size in centimetres, and the size standard in your market.
- Outer dimensions of the base and headboard, and total height with mattress.
- Storage type (gas-lift, drawers, none) and opening direction.
- Leg or plinth style and finish, where the model offers a choice.
- Which mattress you will use, and its height.
- Extra pieces listed by name: bedside tables, pouf.
- Fabric and colour, and destination country and port.
- Your market's compliance requirements, so they are confirmed in the quote.
Do rules or customs codes change by market?
Yes, and they change how you classify and label the product. In the UK, the Furniture and Furnishings (Fire) (Safety) Regulations 1988 cover upholstered furniture such as beds and divans; see the details in our guide on UK furniture fire safety regulations. In the US, the antidumping order on Türkiye is written for mattresses, and a storage base may be classified under different headings, which our HS codes for furniture guide explains. For wider context on bedding, read the mattress manufacturer guide. We do not state compliance for any model here: ask for what you need in the enquiry and it is confirmed in the quote.
How ellda handles storage bed base orders
We produce every model in our 10,500 m² factory in Kayseri Organized Industrial Zone, and check dimensions, stitching, surfaces and mechanisms before packing; you can see the steps on our production page. Products are packed for long-distance transport, and bases can travel with mattresses and seating in one mixed shipment, with the loading plan shared with the quote. Price, minimum order, lead time and shipping terms depend on model, size, fabric and destination, so they are stated in the quote. Our team works in English, Arabic and Turkish, and visits are by appointment.
Next step
Shortlist models by mattress size, check the table above against your local mattress range, and send the list with your storage requirement through our wholesale page. Export buyers can also use the export page.
